Arduino MKR Zero Orijinal - ABX00012

Ürün Açıklaması

Arduino MKR Zero Genel Bakış The MKR ZERO brings you the power of a Zero in the smaller format established by the MKR form factor. The MKR ZERO board acts as a great educational tool for learning about 32-bit application development. It has an on-board SD connector with dedicated SPI interfaces (SPI1) that allows you to play with MUSIC files with no extra hardware! The board is powered by Atmel’s SAMD21 MCU, which features a 32-bit ARM® Cortex® M0+ core. Warning: Unlike most Arduino & Genuino boards, the MKRZero runs at 3.3V. The maximum voltage that the I/O pins can tolerate is 3.3V. Applying voltages higher than 3.3V to any I/O pin could damage the board. The board contains everything needed to support the microcontroller; simply connect it to a computer with a micro-USB cable or power it by a LiPo battery. The battery voltage can also be monitored since a connection between the battery and the analog converter of the board exists. You can find here your board warranty informations. Arduino MKR Zero Teknik Özellikler Microcontroller: SAMD21 Cortex-M0+ 32bit low power ARM® MCU Board Power Supply (USB/VIN): 5V Supported Battery(*): Li-Po single cell, 3.7V, 700mAh minimum DC Current for 3.3V Pin: 600mA DC Current for 5V Pin: 600mA Circuit Operating Voltage: 3.3V Digital I/O Pins: 22 PWM Pins: 12 (0, 1, 2, 3, 4, 5, 6, 7, 8, 10, A3 - or 18 -, A4 -or 19) UART: 1 SPI: 1 I2C: 1 Analog Input Pins: 7 (ADC 8/10/12 bit) Analog Output Pins: 1 (DAC 10 bit) External Interrupts: 10 (0, 1, 4, 5, 6, 7, 8, A1 -or 16-, A2 - or 17) DC Current per I/O Pin: 7 mA Flash Memory: 256 KB Flash Memory for Bootloader: 8 KB SRAM: 32 KB EEPROM: no Clock Speed: 32.768 kHz (RTC), 48 MHz LED_BUILTIN: 32 Full-Speed USB Device and embedded Host Özellik Değer Part Status Active Board Type Evaluation Platform Type MCU 32-Bit Core Processor ARM® Cortex®-M0+ Operating System - Platform Arduino MKR Zero with Headers Utilized IC / Part ATSAMD21 Mounting Type Fixed Contents Board(s)